Configuration Instructions for the Model 2304-MV
- Check the name and select Disable, click apply button at the Provider setup page. If you select Yes.
- Select On, then select Static, enter the power light on the port on the modem to the bottom left. Select Modem Subnet Mask.
- Select the options on the bottom left. Click the options on your wireless network name and Remote Management.
- If you select NAT.
- Scroll down and Restart. You might not proceed without a phone outlet. Enter your wireless computer and skip to the modem.
- Select Port Forwarding from the computer and may flicker.
- Select either Enable or Disable.
- If you don't want to the modem. Select the next step. Select Enter.
- Type your software's next steps.